Array electronic AF-10MR-A2, User Manual

Page: 17 / 129

FAB2 Intelligent Controller
Fig. 2.3 AF2-20 Series (mm)
2.2 Wiring of FAB2
Screwdriver with a spade tip width of 3mm is needed for the wiring of FAB2
series. As for the cross section of a wire. The following two sizes are at choice:
※
1×2.5mm
2
※
2×1.5mm
2
2.2.1 Connection of power supply
1. For FAB2s like AF-10MR-A2 and AF-20MR-A2, its applicable power supply
is 100~240VAC, 50/60Hz. The grid voltage fluctuation range is about 10%.
2. For FAB2s like AF-10MR-D2, AF-20MR-D2, AF-10MT-D2, AF-20MT-D2,
AF-10MT-GD2, AF-20MT-GD2, AF-10MT-E2, AF-20MT-E2, Its applicable
power supply voltage is DC12V-24V.
3. For FAB2s like AF-10MR-E2 and AF-20MR-E2, its applicable power supply
voltage is AC/DC12V-24V.
16