manualshive.com logo in svg

ARM V2M-Juno r2, Technical Reference Manual, Page: 7 / 150

Share
Download
ARM V2M-Juno r2 Technical Reference Manual Download Page 7

 About this book

This book describes the ARM

®

 Versatile

™

 Express Juno r2 Development Platform, that is, the V2M-Juno

r2 motherboard. This development board contains the Juno r2 Development Platform SoC.

 Product revision status

The r

m

p

n

 identifier indicates the revision status of the product described in this book, for example, r

1

p

2

,

where:

r

m

Identifies the major revision of the product, for example, r1.

p

n

Identifies the minor revision or modification status of the product, for example, p2.

 Intended audience

This book is written for experienced hardware and software developers to aid ARMv8-A software and
tooling development in the Juno r2 ARM Development Platform SoC using the V2M-Juno r2
motherboard.

 Using this book

This book is organized into the following chapters:

Chapter 1 Introduction

This chapter introduces the Versatile

™

 Express V2M-Juno r2 motherboard.

Chapter 2 Hardware Description

This chapter describes the Versatile Express V2M-Juno r2 motherboard hardware.

Chapter 3 Configuration

This chapter describes the powerup and configuration process of the Versatile Express V2M-Juno
r2 motherboard.

Chapter 4 Programmers Model

This chapter describes the programmers model of the Versatile Express V2M-Juno r2
motherboard.

Appendix A Signal Descriptions

This appendix describes the signals present at the interface connectors of the Versatile Express
V2M-Juno r2 motherboard.

Appendix B Specifications

This appendix contains the electrical specifications of the Versatile Express V2M-Juno r2
motherboard.

Appendix C Revisions

This appendix describes the technical changes between released issues of this book.

Glossary

The ARM Glossary is a list of terms used in ARM documentation, together with definitions for those
terms. The ARM Glossary does not contain terms that are industry standard unless the ARM meaning
differs from the generally accepted meaning.

See the 

ARM Glossary

 for more information.

Typographic conventions

italic

Introduces special terminology, denotes cross-references, and citations.

bold

Highlights interface elements, such as menu names. Denotes signal names. Also used for terms
in descriptive lists, where appropriate.

 Preface

 About this book

ARM 100114_0200_03_en

Copyright © 2015–2017 ARM Limited or its affiliates. All rights reserved.

7

Non-Confidential

Summary of Contents for V2M-Juno r2























































































































































Reviews:

No comments