ARM V2M-Juno r2 Technical Reference Manual Download Page 24 | Manualshive

Page: 24 / 150

background image

— Nominal drive: Maximum operating frequency: 1GHz.
— Overdrive: Maximum operating frequency: 1.2GHz.

• Quad-core Cortex-A53 cluster:

—  1MB L2 cache.
—  NEON and FPU.
—  Underdrive: Maximum operating frequency: 450MHz.
—  Nominal drive: Maximum operating frequency: 800MHz.
—  Overdrive: Maximum operating frequency: 950MHz.

• Quad-core Mali-T624 GPU cluster:

—  Underdrive: Maximum operating frequency: 450MHz.
—  Nominal drive: Maximum operating frequency: 600MHz.
—  Overdrive: Not supported.

• Internal AXI subsystem operating at up to 533MHz.
• Dual ARM HDLCD display controllers that support HDMI 1.4a up to 1080p.
• Dual DDR3L PHY and 32-bit DDR3L interfaces.
• PCIe Gen 2 4-lane root complex and PHY with coherent and non-coherent modes.
• Thin Links AXI master and slave interfaces to the LogicTile site. At the default clock frequency of

61.5MHz, the operating speeds are:
— Master interface: 68MBps in the forward direction and 78MBps in the reverse direction.
— Slave interface: 246MBps in the forward direction and 305MBps in the reverse direction.

Note

◦ The forward direction is from master to slave and the reverse direction is from slave to master.
◦ Expansion AXI over Thin Links provides a 256MB window.

• USB 2.0 host controller. This is a 480Mbps ULPI interface to off-chip PHY.
• PL354

Static Memory Controller

(SMC).

• PL330

Direct Memory Access

(DMA) controller.

• CoreSight processor debug (P-JTAG) and trace.
• APB subsystem:

— Dual-UART.
— I

2

S 4-channel stereo audio.

—

Power, Voltage, and Temperature

(PVT) monitoring of Juno r2 ARM Development Platform SoC.

— Non-volatile counter. A real time clock that retains its stored value after powerdown.
—

System Control Processor

(SCP). This is a Cortex-M3 processor integrated into the Juno r2 SoC.

It initiates the system architecture and pre-loads memory at powerup and performs power
management and system control functions during runtime.

— I

2

C. This connects to HDMI controllers, the UART transceiver, and other components on the

V2M-Juno r2 motherboard.

— Secure I

2

C. This connects to the secure keyboard.

—  Keys. Encryption keys for signing software.
—  Random-number generator. This operates with the encryption keys when validating software.
—  System override registers that enable you to override various aspects of the Juno r2 SoC.

See the

Juno ARM

®

Development Platform SoC Technical Reference Manual (Revision r2p0)

for more

information. This document lists, in the

Additional Reading

section, references to ARM IP, such as the

PL011 for example, inside the Juno r2 SoC.

2 Hardware Description

2.2 Juno r2 ARM Development Platform SoC

ARM 100114_0200_03_en

Copyright © 2015–2017 ARM Limited or its affiliates. All rights reserved.

2-24

Non-Confidential

«
...
22
23
24
25
26
...
»

Summary of Contents for V2M-Juno r2























































































































































Reviews:

No comments

Related manuals for V2M-Juno r2

Brand: IBM Pages: 357

Brand: Xilinx Pages: 40

Brand: Aaeon Pages: 120

Brand: Yamaha Pages: 114

Brand: EVGA Pages: 2

Brand: Biostar Pages: 31

Brand: Gigabyte Pages: 40

Brand: C&T Solution Pages: 48

Brand: Supero Pages: 92

Brand: Apex Digital Pages: 5

Brand: Texas Instruments Pages: 20

K10N750SLI-WIFI

Brand: ASROCK Pages: 264

Brand: ASROCK Pages: 2

Z87 Extreme9/ac

Brand: ASROCK Pages: 116

Brand: JETWAY Pages: 48

Brand: Apex Digital Pages: 7

90MB1B20-M0EAYC

Brand: Asus Pages: 32

90MB0YP0-M0EAY0

Brand: Asus Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands