manualshive.com logo in svg

ARM V2M-Juno r2, Technical Reference Manual

Share
Download
ARM V2M-Juno r2 Technical Reference Manual Download Page 13

1.2 

About the Versatile

™

 Express Juno r2 Development Platform

The Juno r2 Development Platform, that is, the V2M-Juno r2 motherboard, is a development
motherboard that provides access to the Juno r2 ARM Development Platform SoC. This is a
development chip that supports ARMv8-A software tooling, evaluation, and development.

The V2M-Juno r2 motherboard provides the following:

Juno r2 ARM Development Platform SoC (Juno r2 SoC)

The Juno r2 SoC provides a fully coherent dual-core Cortex

®

-A72 cluster, a fully coherent

quad-core Cortex-A53 cluster, and an I/O-coherent Mali

™

-T624 quad-core GPU cluster.

Dual-core Cortex-A72 cluster:

2MB L2 cache.
NEON

™

 and FPU.

Underdrive: Maximum operating frequency: 600MHz.
Nominal drive: Maximum operating frequency: 1GHz.
Overdrive: Maximum operating frequency: 1.2GHz.

Quad-core Cortex-A53 cluster:

1MB L2 cache.
NEON and FPU.
Underdrive: Maximum operating frequency: 450MHz.
Nominal drive: Maximum operating frequency: 800MHz.
Overdrive: Maximum operating frequency: 950MHz.

Quad-core Mali-T624 cluster:

1MB L2 cache.
NEON and FPU.
Underdrive: Maximum operating frequency: 450MHz.
Nominal drive: Maximum operating frequency: 600MHz.
Overdrive: Not supported.

Separate power domains support power management through 

Dynamic Voltage and Frequency

Scaling

 (DVFS) of the Cortex-A72 and Cortex-A53 clusters, and the Mali-T624 GPU cluster.

 

Note

 

See the 

Juno ARM

®

 Development Platform SoC Technical Reference Manual (Revision r2p0)

 for

more information on the Juno r2 SoC.

LogicTile site

The V2M-Juno r2 motherboard provides two headers that enable you to fit a Versatile Express
LogicTile daughterboard. A Thin Links TLX-400 Network Interconnect connects the
motherboard and daughterboard.

Powerup and configuration system

An on-board EEPROM stores board and file identification information and a microSD card
stores software images and configuration files. You can access the microSD card to perform
configuration file editing and to update software images.

Configuration of the V2M-Juno r2 motherboard and the LogicTile daughterboard, if fitted,
proceeds automatically under the control of the 

Motherboard Configuration Controller

 (MCC)

after powerup or reset.

You can customize the clock speeds and other configuration settings.

1 Introduction

1.2 About the Versatile

™

 Express Juno r2 Development Platform

ARM 100114_0200_03_en

Copyright © 2015–2017 ARM Limited or its affiliates. All rights reserved.

1-13

Non-Confidential

Summary of Contents for V2M-Juno r2























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands