AREMDE NEXUS User Manual Download Page 8 | Manualshive

Page: 8 / 80

background image

8

1.0 GENERAL WARNINGS AND SAFETY PRECAUTIONS

The manufacturer cannot be held responsible or liable for any injuries or damages of any kind caused
to persons, appliances or others due to lack of conformity with the instructions indicated in this
documentation.

The manufacturer cannot be held responsible or liable for abuse, misuse and lack of conformity with the
instructions indicated in this documentation regarding installation, un-installation, operation, servicing or
maintenance.

All equipment made by the manufacturer is delivered assembled and ready to install. Any installation,
un-installation, servicing, maintenance, access or removal of any parts, panels or safety barriers, that is
not in accordance with this documentation, or is not performed by trained and authorised personnel will
result in the immediate loss of the warranty.

The manufacturer cannot be held responsible or liable for any unauthorised modifications. All
modifications must be approved by the manufacturer in writing before initiating, and are only to be
carried out by appropriately trained and authorised personnel.

Before installation of the machine, ensure that the compliance plate corresponds to the applicable
regulations of the national, state or local electrical and plumbing authorities.

«
...
6
7
8
9
10
...
»

Summary of Contents for NEXUS

















































































Reviews:

No comments

Related manuals for NEXUS

Brand: icetro Pages: 50

Brand: La Pavoni Pages: 42

Saeco Xelsis HD8944/01

Brand: Philips Saeco Pages: 3

Brand: Rancilio Pages: 16

Brand: Mahlkonig Pages: 16

Brand: Carimali Pages: 20

Multiplex MS-8-1H

Brand: Multiplex Pages: 24

Brand: Cascade Pages: 4

ENFINIGY 53103-3

Brand: Zwilling Pages: 136

Brand: Faema Pages: 28

Brand: Saeco Pages: 11

Brand: Salton Pages: 6

Brand: Newwave Pages: 19

Brand: Magic Chef Pages: 12

Brand: Hamilton Beach Pages: 26

Brand: Wilfa Pages: 52

Brand: ELIS & Elsa Pages: 28

Brand: Concordia Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands