AREMDE NEXUS, User Manual

Page: 38 / 80

38
- Select group you wish to transfer over from Group 1 by pressing and holding group button (Group 2/
Group 3) for 1 second until it flashes.
- Once desired group buttons have been selected press
to save.
- Press the key to view next functions or return to standby mode.
2.4 STANDARD DOSES
To reset the group heads to factory settings:
- Press
to activate PROGRAM DOSES SELECT menu.
- Press key twice to enter DEFAULT SETTING SELECT GROUPS menu.
- Press group button you wish to restore back to factory settings for 1 second until it flashes.
- Press
to confirm reset of dose.
- Press the key to view next functions or return to standby mode.
3. Delivery Count
- Press to display SELECTION TOTAL SELECT.
- Pressing any of the group head or hot water buttons will show the corresponding counter on the display.
Note: Press group button once to show dose one, or twice to show dose two.
- Press the
key for 3 seconds to reset count total.
- Press the key to display MACHINE TOTAL DELIVERY XXXX.
- This indicates the total amount of deliveries made.
- Press the
key for 3 seconds to reset count total.
6.0 PROGRAMMING AND SET UP