AREMDE NEXUS User Manual Download Page 42

Page: 42 / 80

Do not exceed set point temperature beyond 105°Celsius.

- Press the

key to confirm adjustment and pass to the next value.

- Once the last unit has been confirmed the function will return to the main menu.
- Pressing the

key moves to the next value. Any changes made will not be saved.

8. Cup-Warmer Programming (not activated in Nexus/Stylus One)

9. Date/Hour

- Press

to access date/time settings.

- The time settings will flash on and off, these can be adjusted by using the

keys.

- Press the

key to confirm adjustment and pass to the next value.

- Press the

key to return to the previous menu without confirming.

10. Display Settings

On the display screen it is possible to show the temperature and delivery display of each group.

- Press

to activate TEMP. DISPLAY menu.

- Use the

keys to select ACTIVE or NOT ACTIVE.

6.0 PROGRAMMING AND SET UP

Summary of Contents for NEXUS

















































































Search results

Summary of Contents for NEXUS

Reviews:

Related manuals for NEXUS

Brands by name

Popular brands

AREMDE NEXUS, User Manual

Search results

Summary of Contents for NEXUS

Reviews:

Related manuals for NEXUS

Brands by name

Popular brands