AREMDE NEXUS, User Manual

Page: 19 / 80

19
5.0 SETTING UP NEXUS/STYLUS
5.1 Recommendations And Precautions
Before proceeding, please take note of the surroundings. If required complete a Safe Work Method
Statement prior to commencing the task. When loading and unloading the palletised unit always use a
forklift operated by a licensed driver. Follow the correct safety practices when unpacking, commissioning
and operating this machinery. Gloves and safety footwear may be required.
Beware of sharp edges on equipment and packaging. All care has been taken to ensure sharp burrs and
edgings have been removed before being released from the factory. Sometimes these are not seen so can
still be present. All care should be taken to avoid sliding, pushing, hitting or grasping these surfaces. A
verbal warning should be given to all persons installing, operating or working on this equipment prior to
commencing.
Please ensure all power cables, electrical wiring and their housing are not damaged. If the power cable is
damaged it must be replaced before further use. If the under counter housing is not intact or has been
damaged, please isolate the machine prior to using, installing or operating as this may be a safety risk.
Aremde recommends our equipment be installed by a certified, licensed and qualified technical person.
Local installation and supply regulations vary from country to country. Please check with your local
authorities if in doubt.
5.2 Compliance With Local Regulations