AREMDE NEXUS User Manual Download Page 50 | Manualshive

Page: 50 / 80

background image

50

8.0 OPERATING WEXUS - NEXUS MODELS ONLY

8.1 Overview

- Wexus scales are designed to connect to Nexus via Bluetooth. The scales are engineered to connect and
communicate directly to each group.

- Individual group heads on Nexus are coded to only receive information from the corresponding coded
scale. Scale 1 will only communicate with group 1, Scale 2 will only communicate with group 2 and Scale
3 will only communicate with group 3 (on 3 Group models).

- Wexus is designed to provide real time weighing information. Weight will be displayed on Wexus scales.
Time will be displayed on Nexus display screen and Wexus scales.

8.2 Modes

Wexus operates in two modes:

Brew Mode: Weight is programmed inside Nexus to automatically stop at desired set point. Scale will
be tared once group button is pushed and timer will start.

Target Set Mode: Weight is programmed inside Nexus to automatically stop at desired set point.
Scale is manually tared, then group button is pushed and timer will start.

«
...
48
49
50
51
52
...
»

Summary of Contents for NEXUS

















































































Reviews:

No comments

Related manuals for NEXUS

Brand: Rangemaster Pages: 48

Brand: UFESA Pages: 48

Brand: Melissa Pages: 1

Brand: Gaggia Milano Pages: 159

Brand: Quick Pages: 24

Brand: West Bend Pages: 40

Brand: Sunbeam Pages: 14

Brand: Cuisinart Pages: 8

Brand: Animo Pages: 53

Brand: Mr. Coffee Pages: 13

Brand: Mr. Coffee Pages: 14

Brand: iDPRT Pages: 12

Brand: BERG Pages: 18

Xelsis DELUXE SM8780

Brand: Saeco Pages: 858

Profile XPIOX3SCSS

Brand: GE Pages: 60

Brand: La Pavoni Pages: 8

Brand: WHITE BROWN Pages: 16

Brand: Hamilton Beach Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands