INTRODUCTION
6
1.2. Features
Drives
SAS hard drives
• Up to 8/12 2.5-inch or 3.5-inch SAS hot-plug hard drives
(12.0 Gb/s) at speeds of 7.2K, 10K or 15K rpm
SATA hard drives
• Up to 8/12 2.5-inch or 3.5-inch SATA hot-plug hard drives
(12.0 Gb/s) at speeds of 7.2K or 10K rpm
JBOD Controller Module
Expander board 1 module
Sensors 1 sensor
Backplane Board
Connectors
• 8/12 SAS hard-drive connectors
• 1 power supply connector
• 2 cooling fan module connectors
• 1 sets of expander board connector
Controller Back-Panel Connectors
I/O connectors
• 2 x SFF-8644 "Host In" connectors for connection to the host
• 1 x SFF-8088 "Host In" connectors for connection to the host
(only for 8-bays enclosure)
• 2 x SFF-8644 "Expansion Out" connectors for expansion to an
additional JBOD enclosure
Management connectors
• 1 x 6-pin UART RJ-11 connector
• 1 x RJ-45 LAN connector (manufacture manager only)
LED Indicators
Hard-drive carrier
• 1 blue single-color activity LED status indicator
• 1 two-color fault/power LED status indicator
