CLI Manager
36
• ST Command
The st command stores system configurations or factory default
configurations in flash. Since all the revised parameter setting is
temporarily stored in the working RAM, the ST command saves
those parameters permanently in flash ROM.
1. Store temporarily configurations in flash
Syntax
CLI>st
Example:
CLI>st
CLI>
2. Store factory default configurations in flash
Syntax
CLI>st [default]
Example:
CLI>st default ;;;;; restore the setting to default
CLI>
• LSD Command
The lsd command is use for show the element devices status in
the expander controller. With parameter, this command only show
the seletct device status.
Syntax
CLI>lsd [ hdd | temp | volt | con | ..]
Show SES elements information:
Example:
CLI>lsd
