CLI Manager
40
8. If transfer OK, the transfered data is updated. Cold-start
expander (Power cycle again) to take effect.
Example:
Update procedure, use Xmodem to transfer, refer to “fdl” com
-
mand for detail operation.
CLI>fdl { code | mfgb }
Use HyperTerminal or TeraTerm utility with Xmodem mode to
transfer and update files.
If transfer OK, the transfered data is updated. Cold-start
expander (Power cycle again) to take effect.
The following firmware and data are available in the following
filename format.
1. FW file (CODE) : sas3xfwYYMMDD.fw
2. Data file (MFGB) : mfg12gYYMMDD.dat
Update SAS expander firmware:
CLI>fdl code
Use HyperTerminal or TeraTerm utility with Xmodem mode to
transfer sas3xfwYYMMDD.fw.
If transfer OK, the transfered data is updated. Cold-start
expander (Power cycle again) to take effect.
Update SAS expander data file:
CLI>fdl mfgb
Use HyperTerminal or TeraTerm utility with Xmodem mode to
transfer mfg12gYYMMDD.dat.
If transfer OK, the transfered data is updated. Cold-start
expander (Power cycle again) to take effect.
• Counters Reset Command
Display/Reset all phy counters counters reset (optional).
CLI>counters reset
Phy counters successfully reset.
CLI>counters
