CLI Manager
34
• FAN Command
The fan command allows you to set the operate fan speed. Typi-
cal parameters include: LowestSpeed and WarningSpeed are fan
speed in speed code from level 1 to 7.
The LowestSpeed is the speed code that fan operate in normal
state, and the WarningSpeed is the speed code that fan operate
in warning state; like as detect a device in over-temperature.
Syntax
CLI>fan LowestSpeed WarningSpeed
Example:
CLI>fan
Cooling Element (0x03):
========================================
SPEED
NAME CODE RPM STATUS
Fan 01 5 2250 OK
Fan 02 5 2230 OK
Saved FAN Speed Attribute:
Lowest SpeedCode: 5
Warning SpeedCode: 7
CLI>fan 3 7
New FAN Speed Attribute:
Lowest SpeedCode: 3
Warning SpeedCode: 7
Saved FAN Speed Attribute:
Lowest SpeedCode: 5
Warning SpeedCode: 7
CLI>st
CLI>
Reboot to take effect.
CLI>fan
Cooling Element (0x03):
