HARDWARE INSTALLATION
14
c. After all drives are in the drive tray, slide all of them back
into the ARC-4038 JBOD enclosure and make sure you
latch the drive trays.
Note:
Please secure four of the mounting screws to the tray, other
-
wise the ARC-4038 may produce an annoying BUZZ sound in
a few environments.
Figure 2-6, Slide drive tray back into the ARC-4038
Step 2. Connecting ARC-4038 SAS JBOD Enclosure to Host
Computer or Next JBOD
The external host and expansion connectors are provided on
the back of the SAS JBOD enclosure for connecting the JBOD to
external RAID controller, server host adapter or next JBOD. There
are four host SFF-8644 connectors and one expansion SFF-8088
connectors on the rear of ARC-4038.
•
Host Port Connection
By installing host port adapter and ARC-4038 Host Port0 and
Host Port1 using the correct external cables which are included in
your SAS JBOD enclosure kits. Then connect
ARC-4038
SAS JBOD
enclosure and host port adapter as shown below:
(a). Basic Connection
Connect the ARC-4038 to a single host using one SFF-8088 cable.
