CLI Manager
33
Firmware Copy 2: [Active]
Revision: 100.BD.01.0A 06/18/15
Firmware Family: 0 OemFamily: 0
Fast Boot: Yes Image Address: 0x10200000
HAL Revision: 0.1.0.0 SES Revision: 0.1.0.0 SCE Revision:
0.1.0.0
● BU Command
The BU command allows you to control the buzzer attributes that
have been controlled by SAS expander H/W. There are four sound
levels defined by the expander H/W. The default warning is sound
level 2 and critical: sound level 3.
Syntax
CLI>BU [Warning Critical] [MUTE]
Example:
CLI>BU
Buzzer Attribute:
Warning Beep: Sound 2
Critical Beep: Sound 3
CLI>BU 0x1 0x3
CLI>BU
Buzzer Attribute:
Warning Beep: Sound 1
Critical Beep: Sound 3
CLI>
When expander alarm with buzzer, you can temporarily mute it
with the following command. The buzzer still can be activated by
the next different event.
CLI>BU MUTE
When expander alarm with buzzer, you can disable it completely
by command “bu 0 0”. If you would like to enable beeper, the
command for default settings will be “bu 2 3”.
