CLI Manager
30
Slot01 Temp
03
31
60
5
No
Slot02 Temp
04
32
60
5
No
Slot03 Temp
05
30
60
5
No
Slot04 Temp
06
31
60
5
No
Slot05 Temp
07
36
60
5
No
Slot06 Temp
08
32
60
5
No
Slot07 Temp
09
32
60
5
No
Slot08 Temp
10
35
60
5
No
•
GROUP Command
The group command is used to associate the external port with
the devices/phys as one zone group. The three external cable
ports and all devices/phys slots will default associate with one
zone group.
Syntax
gr {dev GroupNo[1..] {ci, cj, ck,..} Start-Index(D) End-Index(D)
}
gr {off | [t10 off] }
dev : use drive slot index
GroupNo : groupno start from 1, max 8 groups ci, cj, ck,..:
external cable connector. i, j, k,.. is the index which range from 0
to 3. According to view from connector side, index start from
right to left or top to bottom. The cable c0, c1, c2, c3, or c4 is
view from top to bottom.
Start-Index : Start slot index of zone range, [1.. max drive]
End-Index : End slot index of zone range, [1.. max drive]
off : clear the zone group setting.
t10 off : turn T10 mode off.
Example:
CLI>gr
Current PHY Group Mode: T10
Group-1: C0, C1, C2, C3, C4 Slot: 1, 2, 3, 4, 5, 6, 7, 8
Value: 0x0000000FFFFFFFFF
//Set the cable0 and slot 1 to slot 6 as group 1
CLI>gr dev 1 c0 1 6
