3-52
KX141
8. Install all exhaust system heat shields and tighten
the mounting screws securely; then install two
muffler mounts, hardware, and bolts and tighten
securely.
KX123
KX126
9. Install the two upper and one lower coolant hoses
and tighten the hose clamps securely. Make sure to
install the two coolant hoses connected to the
carburetors.
KX086B
10. Remove the tape or caps from the intake hoses
checking for any dirt, hardware items, or liquids;
then install the carburetors into the intake hoses
and tighten the clamps securely. Make sure the
carburetors are securely seated by rocking side to
side after installation.
KX122
KX123
11. Connect the throttle cable and check for proper
free-play; then install the cover and tighten the
screw securely.
KX136
12. Install the electronics mounting tray with the CDI,
starter relay, and EBC module attached; then
secure with four mounting screws.
! CAUTION
Make sure to check intake hoses for any foreign
matter. Severe engine damage will occur if
liquids or hardware items are ingested at
start-up.
Summary of Contents for 2004 650
Page 1: ......
Page 54: ...3 54 NOTES...
