3-43
3
KX336
26. Align the punch mark (B) on the intermediate
shaft sprocket (A) with the index mark (C) on the
crankcase.
KX337
27. Engage the splines of the intermediate drive
sprocket and shaft aligning the punch mark (A) on
the shaft with the punch mark (B) on the sprocket.
KX338
28. Install the nut (A); then hold the intermediate shaft
from the right side with an Allen wrench and
tighten to 4.5 kg-m (32.5 ft-lb).
KX339
29. Install the position plate (A); then tighten cap
screws (B) to 0.9 kg-m (78 in.-lb).
KX340
30. Install the front intermediate shaft chain guide (A);
then tighten the mounting cap screws (B) to 0.9
kg-m (78 in.-lb).
KX341
31. Place the rear intermediate chain guide (A) onto
the pivot as shown; then secure with a flat washer
(B) and circlip (C).
KX342
Summary of Contents for 2004 650
Page 1: ......
Page 54: ...3 54 NOTES...
