3-45
3
KX348A
3. Loop the belt over the driven pulley; then install
the drive clutch with holding tool (A) with cap
screws (B) referenced to the arrow (D) and tighten
the cap screw (C) (left-hand threads) to 9.5 kg-m
(69 ft-lb).
KX349
4. Check that drive belt deflection is within
specifications (see Section 2).
Installing Left-Side
Components
1. Install a new circlip (A) securing the oil pump
rotor (B) in rotor (C); then apply clean engine oil
to the rotors and shaft (D).
KX350A
2. Make sure that alignment pins (A) are in place and
apply clean engine oil to oil port (B).
KX351
3. Install the oil pump drive chain (A) with the oil
pump assembly (B); then tighten the cap screws
(C) to 0.9 kg-m (78 in.-lb).
KX352
4. Install the upper chain guide (A) with the tab (B)
directed downward; then install the lower chain
guide (C) and collar (D). Tighten the chain guide
attaching bolts to 0.9 kg-m (78 in.-lb).
ATV2094
AT THIS POINT
The drive clutch holder can be left installed to
hold the crankshaft for left-side component
installation.
Summary of Contents for 2004 650
Page 1: ......
Page 54: ...3 54 NOTES...
