Arctic Cat 2004 650, Service Manual

Page: 30 / 54

3-30
KX291
3. Inspect the ramp weights (A) and pins (B) in the
movable sheave. Replace any worn parts.
KX292
4. Inspect the rollers (A) and washers (C) in the
spider. If they are worn, replace the spider
assembly (B).
KX293
Assembling
1. Install the ramp weights (A) and tighten nuts (B)
to specifications; then check that the ramp weights
swing freely.
KX294
2. Place the fixed sheave on the clutch holder; then
install the movable sheave, spider (A) and shoes
(B) aligning the arrow (C) with the arrow (D) on
the movable sheave.
KX295
3. Install the spider wrench (A) on the spider (B) and
tighten bolt (C); then tighten spider
counterclockwise to specifications.
KX296
4. Install the spring spacer in the spider; then install
the spring (A) in the spider groove.
5. Install the alignment pins (C); then install the
clutch cover aligning the arrows (B) on the clutch
cover and spider. Tighten to specifications.