3-41
3
GZ272B
Disassembling
Crankcase Half
NOTE: For steps 1-8, refer to photograph
GZ298A.
GZ298A
NOTE: To aid in installing, it is recommended
that the assemblies are kept together and IN
ORDER.
1. Support the right-side crankcase assembly on suit-
able support blocks; then carefully remove the
crankshaft assembly (A) from the crankcase.
GZ298
2. Remove the snap ring securing the water pump
drive idler (B) to the idler shaft; then remove the
drive idler.
GZ299A
3. Remove the water pump driven shaft (C). Account
for the driven gear and drive pin.
GZ304A
4. Remove the snap ring securing the oil pump
driven gear (D) to the oil pump driveshaft; then
remove the gear. Account for a drive pin and
washer.
GZ301A
5. Remove the shift fork shaft (E); then remove the
gear shift shaft assembly (F). Account for two flat
washers.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
