3-44
2. Inspect the crankcase for securing, discoloration,
or cracks in the gerotor bore. If scored, crankcase
assembly must be replaced.
GZ357
3. Inspect the gerotor set for scoring, discoloration,
or cracks; then using a feeler gauge, check the
inner to outer rotor clearance. If measurements
exceed specifications, the gerotor set must be
replaced.
GZ355
4. Inspect the oil pump cover for scoring, discolora-
tion, or cracks. Replace if damaged.
GZ358
5. Inspect the oil pump driveshaft and drive pin for
excessive wear or grooving. Replace as required.
GZ354A
6. Remove the oil seal from the oil pump cover.
GZ365
Assembling
1. Install a new oil seal into the oil pump cover; then
coat the lips of the seal with grease and install the
pump driveshaft from the seal side.
GZ359
2. Noting the reference dots on the gerotor set, sepa-
rate the inner rotor from the outer rotor and with
the reference dot directed toward the oil pump
cover, place the rotor on the shaft; then install the
drive pin and push the shaft into the rotor.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
