3-27
3
CD465
25. Rotate the crankshaft until the first cap screw
(from step 17) can be addressed; then tighten to 10
ft-lb. Bend the tab to secure the cap screw.
GZ194
26. Place the C-rings into position in their grooves in
the cylinder heads.
CC012D
27. Install the cylinder head plugs in the cylinder
heads with the open end facing downward and
toward the inside.
CD468
28. Remove the cap screw from the end of the chain
tensioner; then using a flat-blade screwdriver,
rotate the adjuster screw inside the tensioner
clockwise until the screw bottoms.
CD501
NOTE: The adjuster shaft will be drawn into the
tensioner as the adjuster screw is rotated clock-
wise. The adjuster shaft tension will be released in
step 30.
29. Place the chain tensioner adjuster assembly and
gasket into position on the cylinder and secure
with the two cap screws.
CD469
30. Using a flat-blade screwdriver, rotate the adjuster
screw inside the tensioner counterclockwise until
all tension is released; then install the cap screw
into the end of the chain tensioner.
! CAUTION
The open end of the plug must be positioned down-
ward.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
