3-31
3
GZ236A
10. Remove the cap screw securing the shift cam plate
to the shift cam shaft and remove the shift cam
plate; then remove the shift shaft. Account for a
washer.
GZ234B
11. Remove the cap screws securing the speed sensor
housing to the crankcase and remove the housing
assembly; then remove the snap ring securing the
speed sensor trigger to the shaft and remove the
trigger. Account for a gasket.
GZ243
GZ235
12. Remove the cap screws securing the oil filler
cover to the crankcase; then remove the cover.
Account for an O-ring.
GZ250
Installing Left-Side
Components
1. Thoroughly clean all gasket material and sealant
from mating surfaces.
2. Install a new O-ring on the oil filler cover and coat
it with clean engine oil; then install the oil filler
cover into the crankcase and secure with the cap
screws. Tighten to 8 ft-lb.
GZ250
3. Install the inner snap ring onto the countershaft;
then install the speed sensor trigger, a flat washer,
and the outer snap ring.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
