3-51
3
GZ339
The right-side crankcase is now ready for installation
to the left-side crankcase.
Joining Crankcase
Halves
1. Using rubber bands, support the connecting rods to
align with the cylinder bores.
GZ340
2. Install the spacer washer on the crankshaft with
the radius directed toward the crankshaft.
GZ341
3. Install the two alignment pins; then apply a thin
bead of silicone sealant to the crankcase mating
surface.
GZ345A
4. Carefully join the crankcase halves by placing the
left-side crankcase onto the assembled right side.
Secure with the cap screws (eight left side and one
right side).
GZ342
5. Tighten the cap screws to 8 ft-lb using the pattern
shown and turning the shafts frequently to insure
there is no binding.
GZ375A
NOTE: Cap screw number eight (8) is installed
from the right side.
AT THIS POINT
Proper transmission shifting should be verified by
turning the gear shift shaft to select High, Low, Neu-
tral, and Reverse while rotating the input shaft and
observing the countershaft rotation.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
