background image

E-39

E-38

English

product 

guarantee

Worldwide Guarantee

This entitles you to have the unit repaired free of charge, during the first two years after purchase, provided that it was originally 
purchased from an authorised Arcam dealer. The Arcam dealer is responsible for all after-sales service. The manufacturer can take 
no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/
or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the 
guarantee.

The warranty covers:

Parts and labour costs for two years from the purchase date. After two years you must pay for both parts and labour costs. 

The 

warranty does not cover transportation costs at any time.

Claims under guarantee

This equipment should be packed in the original packing and returned to the dealer 

from whom it was purchased

. It should be sent 

carriage prepaid by a reputable carrier – 

not

 by post. No responsibility can be accepted for the unit whilst in transit to the dealer or 

distributor and customers are therefore advised to insure the unit against loss or damage whilst in transit.
For further details contact Arcam at 

[email protected]

.

Problems?

If your Arcam dealer is unable to answer any query regarding this or any other Arcam product please contact Arcam Customer Support 
at the above address and we will do our best to help you.

On-line registration

You can register your product on-line at 

www.arcam.co.uk

.

trademarks

This item incorporates copy protection technology 
that is protected by U.S. patents and other intellectual 
property rights of Rovi Corporation. Reverse 
engineering and disassembly are prohibited.

IOS is a trademark or registered trademark of Cisco in 
the U.S. and other countries and is used under license.

App Store

SM

 is a service mark of Apple Inc.

‘AVCHD’ and the ‘AVCHD’ logo are trademarks of 
Panasonic Corporation and Sony Corporation.

Java and all Java-based trademarks and logos 
are trademarks or registered trademarks of Sun 
Microsystems, Inc. in the U.S. and other countries.

The ‘BD-LIVE’ logo is a trademark of Blu-ray Disc 
Association.

‘Blu-ray Disc’, ‘Blu-ray’ and the ‘Blu-ray Disc’ logo are 
trademarks of Blu-ray Disc Association.

‘BONUSVIEW’ is a trademark of Blu-ray Disc Association.

Manufactured under license from Dolby Laboratories. 
Dolby and the double-D symbol are trademarks of 
Dolby Laboratories.

For DTS patents, see http://patents.dts.com. 
Manufactured under license from DTS Licensing 
Limited. DTS, the Symbol, DTS in combination with the 
Symbol, the DTS-HD logo and DTS-HD Master Audio 
are registered trademarks or trademarks of DTS, Inc. in 
the United States and/or other countries. © DTS, Inc. All 
Rights Reserved.

 is a trademark of DVD format/Logo licensing 

Corporation.

HDMI, the HDMI logo and High-Definition Multimedia 
Interface are trademarks or registered trademarks of 
HDMI Licensing LLC.

MPEG Layer-3 audio coding technology licensed from 
Fraunhofer IIS and Thomson.

This product uses some software programs which are 
listributed under the GPL license. Accordingly, the 
following GPL software source codes that have been 
used in this product can be provided after asking at 

http://www.sherwoodamerica.com.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 
USA

Everyone is permitted to copy and distribute verbatim 
copies of this license document, but changing it is not 
allowed.

Preamble

The licenses for most software are designed to 
take away your freedom to share and change it. By 
contrast, the GNU General Public License is intended 
to guarantee your freedom to share and change free 
software--to make sure the software is free for all its 
users. This General Public License applies to most of the 
Free Software Foundation’s software and to any other 
program whose authors commit to using it. (Some 
other Free Software Foundation software is covered by 
the GNU Lesser General Public License instead.) You can 
apply it to your programs, too.

When we speak of free software, we are referring to 
freedom, not price. Our General Public Licenses are 
designed to make sure that you have the freedom to 
distribute copies of free software (and charge for this 
service if you wish), that you receive source code or can 
get it if you want it, that you can change the software 
or use pieces of it in new free programs; and that you 
know you can do these things.

To protect your rights, we need to make restrictions 
that forbid anyone to deny you these rights or to ask 
you to surrender the rights. These restrictions translate 
to certain responsibilities for you if you distribute 
copies of the software, or if you modify it. For example, 
if you distribute copies of such a program, whether 
gratis or for a fee, you must give the recipients all the 
rights that you have. You must make sure that they, too, 
receive or can get the source code. And you must show 
them these terms so they know their rights.

We protect your rights with two steps: (1) copyright 
the software, and (2) offer you this license which gives 
you legal permission to copy, distribute and/or modify 
the software.

Also, for each author’s protection and ours, we want 

to make certain that everyone understands that there 
is no warranty for this free software. If the software is 
modified by someone else and passed on, we want 
its recipients to know that what they have is not the 
original, so that any problems introduced by others will 
not reflect on the original authors’ reputations.

Finally, any free program is threatened constantly 
by software patents. We wish to avoid the danger 
that redistributors of a free program will individually 
obtain patent licenses, in effect making the program 
proprietary. To prevent this, we have made it clear that 
any patent must be licensed for everyone’s free use or 
not licensed at all. 

The precise terms and conditions for copying, 
distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION 
AND MODIFICATION

This License applies to any program or other work 
which contains a notice placed by the copyright 
holder saying it may be distributed under the terms 
of this General Public License. The ‘Program’, below, 
refers to any such program or work, and a ‘work based 
on the Program’ means either the Program or any 
derivative work under copyright law: that is to say, a 
work containing the Program or a portion of it, either 
verbatim or with modifications and/or translated into 
another language. (Hereinafter, translation is included 
without limitation in the term ‘modification’.) Each 
licensee is addressed as ‘you’.

Activities other than copying, distribution and 
modification are not covered by this License; they 
are outside its scope. The act of running the Program 
is not restricted, and the output from the Program is 
covered only if its contents constitute a work based on 
the Program (independent of having been made by 
running the Program). Whether that is true depends on 
what the Program does.

ENGLISH

1.You may copy and distribute verbatim copies of the 
Program’s source code as you receive it, in any medium, 
provided that you conspicuously and appropriately 
publish on each copy an appropriate copyright notice 
and disclaimer of warranty; keep intact all the notices 
that refer to this License and to the absence of any 
warranty; and give any other recipients of the Program 
a copy of this License along with the Program.

You may charge a fee for the physical act of transferring 
a copy, and you may at your option offer warranty 
protection in exchange for a fee.

2. You may modify your copy or copies of the Program 
or any portion of it, thus forming a work based on the 
Program, and copy and distribute such modifications or 
work under the terms of Section 1 above, provided that 
you also meet all of these conditions:

a) You must cause the modified files to carry prominent 
notices stating that you changed the files and the date 
of any change.

b) You must cause any work that you distribute or 
publish, that in whole or in part contains or is derived 
from the Program or any part thereof, to be licensed 
as a whole at no charge to all third parties under the 
terms of this License.

c) If the modified program normally reads commands 
interactively when run, you must cause it, when started 
running for such interactive use in the most ordinary 
way, to print or display an announcement including 
an appropriate copyright notice and a notice that 
there is no warranty (or else, saying that you provide a 
warranty) and that users may redistribute the program 
under these conditions, and telling the user how to 
view a copy of this License. (Exception: if the Program 
itself is interactive but does not normally print such an 
announcement, your work based on the Program is not 
required to print an announcement.)

These requirements apply to the modified work as 
a whole. If identifiable sections of that work are not 
derived from the Program, and can be reasonably 
considered independent and separate works in 
themselves, then this License, and its terms, do not 
apply to those sections when you distribute them as 
separate works. But when you distribute the same 
sections as part of a whole which is a work based on 
the Program, the distribution of the whole must be on 
the terms of this License, whose permissions for other 

licensees extend to the entire whole, and thus to each 
and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights 
or contest your rights to work written entirely by you; 
rather, the intent is to exercise the right to control the 
distribution of derivative or collective works based on 
the Program.

In addition, mere aggregation of another work not 
based on the Program with the Program (or with a 
work based on the Program) on a volume of a storage 
or distribution medium does not bring the other work 
under the scope of this License.

3. You may copy and distribute the Program (or a 
work based on it, under Section 2) in object code or 
executable form under the terms of Sections 1 and 2 
above provided that you also do one of the following:

a) Accompany it with the complete corresponding 
machine-readable source code, which must be 
distributed under the terms of Sections 1 and 2 
above on a medium customarily used for software 
interchange; or,

b) Accompany it with a written offer, valid for at least 
three years, to give any third party, for a charge no 
more than your cost of physically performing source 
distribution, a complete machine-readable copy of the 
corresponding source code, to be distributed under 
the terms of Sections 1 and 2 above on a medium 
customarily used for software interchange; or,

c) Accompany it with the information you received as 
to the offer to distribute corresponding source code. 
(This alternative is allowed only for noncommercial 
distribution and only if you received the program in 
object code or executable form with such an offer, in 
accord with Subsection b above.)

The source code for a work means the preferred form 
of the work for making modifications to it. For an 
executable work, complete source code means all 
the source code for all modules it contains, plus any 
associated interface definition files, plus the scripts 
used to control compilation and installation of the 
executable. However, as a special exception, the source 
code distributed need not include anything that is 
normally distributed (in either source or binary form) 
with the major components (compiler, kernel, and so 
on) of the operating system on which the executable 
runs, unless that component itself accompanies the 
executable.

Summary of Contents for SOLO MUSIC












































Reviews: