Arcam SOLO MUSIC Handbook Download

Page: 5 / 43

E-5

E-4

English

CAUTIONS ON INSTALLATION

For proper heat dispersal, do not install this

unit in a confined space, such as a bookcase

or similar enclosure.
More than 0.3 m (12 in.) is recommended
Do not place any other equipment on this

unit

SAFETY INFORMATION (FOR
EUROPEAN CUSTOMERS)

• Avoid high temperatures. Allow for sufficient

heat dispersion when installed in a rack

• Handle the power cord carefully. Hold the

plug when unplugging the cord

• Keep the unit free from moisture, water, and

dust

• Unplug the power cord when not using the

unit for long periods of time

•  Do not obstruct the ventilation holes
•  Do not let foreign objects into the unit
•  Do not let insecticides, benzene, and thinner

come in contact with the unit.

• Never disassemble or modify the unit in any

way

• Ventilation should not be impeded by

covering the ventilation openings with items,

such as newspapers, tablecloths or curtains

• Naked flame sources such as lighted candles

should not be placed on the unit

• Observe and follow local regulations

regarding battery disposal

• Do not expose the unit to dripping or

splashing fluids

• Do not place objects filled with liquids, such as

vases, on the unit.

• Do not handle the mains cord with wet hands
• When the switch is in the OFF position, the

equipment is not completely switched off

from MAINS

• The equipment shall be installed near the

power supply so that the power supply is

easily accessible

FCC/IC INFORMATION (FOR US AND
CANADA CUSTOMERS)

1. Product

This product complies with Part 15 of the

FCC Rules/ Industry Canada licence-exempt

RSS standard(s). Operation is subject to the

following two conditions: (1) This device may

not cause harmful interference, and (2) this

device must accept any interference received,

including interference that may cause undesired

operation.

Le présent appareil est conforme aux CNR

d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée

aux deux conditions suivantes : (1) l’appareil ne

doit pas produire de brouillage, et (2) l’utilisateur

de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

2. Important notice: do not modify

this product

This product, when installed as indicated in the

instructions contained in this manual, meets

FCC requirements.
Modification not expressly approved by ARCAM

may void your authority, granted by the FCC, to

use the product.

3. Note

This product has been tested and found to

comply with the limits for a Class B digital

device, persuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation.
This product generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in

a particular installation. If this product does

cause harmful interference to radio or television

reception, which can be determined by turning

the product OFF and ON, the user is encouraged

to try to correct the interference by one or more

of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the

equipment and receiver.

• Connect the product into an outlet on a circuit

different from that to which the receiver is

connected.

• Consult the local retailer authorized

to distribute this type of product or an

experienced radio/TV technician for help.

FDA INFORMATION (FOR US
CUSTOMERS)

Complies with 21 CFR 1040.10 and 1040.11

except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.

CANADA STATEMENT

This product contains IC 9088-BLR7601HL.
Operation is subject to the following two

conditions:
(1) this product may not cause harmful

interence, and (2) this product must accpet any

inteference received, including interference that

may cause undesired operation.
This Class B digital apparatus complies with

Canada ICES-003.
Under Industry Canada regulations, this

radio transmitter may only operate using

an antenna of a type and maximum (or

lesser) gain approved for the transmitter by

Industry Canada. To reduce potential radio

interference to other users, the antenna type

and its gain should be so chosen that the

equivalent isotropically radiated power (e.i.r.p.)

is not more than that necessary for successful

communication.

Conformément à la réglementation d’Industrie

Canada, le présent émetteur radio peut

fonctionner avec une antenne d’un type et d’un

gain maximal (ou inférieur) approuvé pour

l’émetteur par Industrie Canada. Dans le but de

réduire les risques de brouillage radioélectrique

à l’intention des autres utilisateurs, il faut

choisir le type d’antenne et son gain de sorte

que la puissance isotrope rayonnée équivalente

(p.i.r.e.) ne dépasse pas l’intensité nécessaire à

l’établissement d’une communication satisfaisante.

MPE Reminding

To satisfy FCC / IC RF exposure requirements, a

separation distance of 20 cm or more should be

maintained between the antenna of this device

and persons during device operation. To ensure

compliance, operations at closer than this

distance is not recommended.

Les antennes installées doivent être situées de

facon à ce que la population ne puisse y être

exposée à une distance de moin de 20 cm. Installer

les antennes de facon à ce que le personnel ne

puisse approcher à 20 cm ou moins de la position

centrale de l’ antenne. La FCC des éltats-unis stipule

que cet appareil doit être en tout temps éloigné

d’au moins 20 cm des personnes pendant son

functionnement.

safety

Important safety instructions

Read these instructions

All the safety and operating instructions should be
read before this product is operated.

Keep these instructions

The safety and operating instructions should be
retained for future reference.

Heed all warnings

All warnings on the appliance and in the operating
instructions should be adhered to.

Follow all instructions

All operating and use instructions should be
followed.

Do not use this apparatus near water

The appliance should not be used near water or
moisture – for example, in a wet basement or near a
swimming pool.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

This equipment is a Class II or double insulated
electrical appliance. It has been designed in
such a way that it does not require a safety
connection to electrical earth.

Correct disposal of this product

This product contains electrical or electronic materials.
The presence of these materials may, if not disposed
of properly, have potential adverse effects on the
environment and human health. Presence of this label
on the product means it should not be disposed of as
unsorted waste and must be collected separately. As
a consumer, you are responsible for ensuring that this
product is disposed of properly.

Safety compliance

This equipment has been designed to meet the IEC/
EN 60065 international electrical safety standard.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

15. Please keep the unit in a well-ventilated

environment.

WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain, moisture, dripping or splashing. Objects
filled with liquids, such as vases should not be placed on the
apparatus.
WARNING: The mains plug or appliance coupler is used as a
disconnect device, the disconnect device shall remain readily
operable.

This lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of non-insulated
‘dangerous voltage’ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.

Warning: To reduce the risk of electric shock, do not remove cover
(or back) as there are no user-serviceable parts inside. Refer
servicing to qualified personnel.

The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
instructions in the literature accompanying the appliance.

Wall

A NOTE ABOUT RECYCLING

This product’s packaging materials are

recyclable and can be reused. Please dispose

of any materials in accordance with the local

recycling regulations. When discarding the

unit, comply with local rules or regulations.

Batteries should never be thrown away or

incinerated but disposed of in accordance

with the local regulations concerning battery

disposal. This product and the supplied

accessories,