background image

E-41

E-40

English

If distribution of executable or object code is made 
by offering access to copy from a designated place, 
then offering equivalent access to copy the source 
code from the same place counts as distribution of 
the source code, even though third parties are not 
compelled to copy the source along with the object 
code.

4. You may not copy, modify, sublicense, or distribute 
the Program except as expressly provided under 
this License. Anyattempt otherwise to copy, modify, 
sublicense or distribute the Program is void, and will 
automatically terminate your rights under this License. 
However, parties who have received copies, or rights, 
from you under this License will not have their licenses 
terminated so long as such parties remain in full 
compliance.

5. You are not required to accept this License, since you 
have not signed it. However, nothing else grants you 
permission to modify or distribute the Program or its 
derivative works. These actions are prohibited by law if 
you do not accept this License. Therefore, by modifying 
or distributing the Program (or any work based on the 
Program), you indicate your acceptance of this License 
to do so, and all its terms and conditions for copying, 
distributing or modifying the Program or works based 
on it.

6. Each time you redistribute the Program (or any work 
based on the Program), the recipient automatically 
receives a license from the original licensor to copy, 
distribute or modify the Program subject to these 
terms and conditions. You may not impose any further 
restrictions on the recipients’ exercise of the rights 
granted herein. You are not responsible for enforcing 
compliance by third parties to this License.

7. If, as a consequence of a court judgment or 
allegation of patent infringement or for any other 
reason (not limited to patent issues), conditions are 
imposed on you (whether by court order, agreement 
or otherwise) that contradict the conditions of this 
License, they do not excuse you from the conditions 
of this License. If you cannot distribute so as to satisfy 
simultaneously your obligations under this License and 
any other pertinent obligations, then as a consequence 
you may not distribute the Program at all. For example, 
if a patent license would not permit royalty-free 

redistribution of the Program by all those who receive 
copies directly or indirectly through you, then the 
only way you could satisfy both it and this License 
would be to refrain entirely from distribution of the 
Program. If any portion of this section is held invalid 
or unenforceable under any particular circumstance, 
the balance of the section is intended to apply and 
the section as a whole is intended to apply in other 
circumstances. It is not the purpose of this section to 
induce you to infringe any patents or other property 
right claims or to contest validity of any such claims; 
this section has the sole purpose of protecting the 
integrity of the free software distribution system, which 
is implemented by public license practices. Many 
people have made generous contributions to the wide 
range of software distributed through that system in 
reliance on consistent application of that system; it is 
up to the author/donor to decide if he or she is willing 
to distribute software through any other system and 
a licensee cannot impose that choice. This section is 
intended to make thoroughly clear what is believed to 
be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is 
restricted in certain countries either by patents or by 
copyrighted interfaces, the original copyright holder 
who places the Program under this License may add an 
explicit geographical distribution limitation excluding 
those countries, so that distribution is permitted only 
in or among countries not thus excluded. In such case, 
this License incorporates the limitation as if written in 
the body of this License.

9. The Free Software Foundation may publish revised 
and/or new versions of the General Public License 
from time to time. Such new versions will be similar 
in spirit to the present version, but may differ in detail 
to address new problems or concerns. Each version is 
given a distinguishing version number. If the Program 
specifies a version number of this License which 
applies to it and ‘any later version’, you have the option 
of following the terms and conditions either of that 
version or of any later version published by the Free 
Software Foundation. If the Program does not specify 
a version number of this License, you may choose 
any version ever published by the Free Software 
Foundation.

10. If you wish to incorporate parts of the Program into 

other free programs whose distribution conditions are 
different, write to the author to ask for permission. For 
software which is copyrighted by the Free Software 
Foundation, write to the Free Software Foundation; 
we sometimes make exceptions for this. Our decision 
will be guided by the two goals of preserving the free 
status of all derivatives of our free software and of 
promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF 
CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, 
TO THE EXTENT PERMITTED BY APPLICABLE LAW. 
EXCEPT WHEN OTHERWISE STATED IN WRITING 
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES 
PROVIDE THE PROGRAM ‘AS IS’ WITHOUT WARRANTY 
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE 
QUALITY AND PERFORMANCE OF THE PROGRAM IS 
WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, 
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, 
REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE 
LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT 
HOLDER, OR ANY OTHER PARTY WHO MAY 
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS 
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, 
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES ARISING OUT OF THE 
USE OR INABILITY TO USE THE PROGRAM (INCLUDING 
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING 
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU 
OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO 
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH 
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of 
the greatest possible use to the public, the best way to 
achieve this is to make it free software which everyone 
can redistribute and change under these terms.

To do so, attach the following notices to the program. 
It is safest to attach them to the start of each source file 
to most effectively convey the exclusion of warranty; 
and each file should have at least the ‘copyright’ line 
and a pointer to where the full notice is found.

One line to give the program’s name and a brief idea 
of what it does.

Copyright (C) <year><name of author>

This program is free software; you can redistribute it 
and/or modify it under the terms of the GNU General 
Public License as published by the Free Software 
Foundation; either version 2 of the License, or (at your 
option) any later version.

This program is distributed in the hope that it will be 
useful, but WITHOUT ANY WARRANTY; without even 
the implied warranty of MERCHANTABILITY or FITNESS 
FOR A PARTICULAR PURPOSE. See the GNU General 
Public License for more details.

You should have received a copy of the GNU General 
Public License along with this program; if not, write to 
the Free Software Foundation, Inc., 59 Temple Place, 
Suite 330, Boston, MA 02111-1307 USA

Also add information on how to contact you by 
electronic and paper mail.

If the program is interactive, make it output a short 
notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name 
of author Gnomovision comes with ABSOLUTELY 
NO WARRANTY; for details type ‘show w’. This is free 
software, and you are welcome to redistribute it under 
certain conditions; type ‘show c’ for details.

The hypothetical commands ‘show w’ and ‘show c’ 
should show the appropriate parts of the General 
Public License. Of course, the commands you use may 
be called something other than ‘show w’ and ‘show 
c’; they could even be mouse-clicks or menu items--
whatever suits your program.

You should also get your employer (if you work as a 
programmer) or your school, if any, to sign a ‘copyright 
disclaimer’ for the program, if necessary. Here is a 

sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest 
in the program ‘Gnomovision’ (which makes passes at 
compilers)

written by James Hacker.

signature of Ty Coon, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit 
incorporating you program into proprietary programs. 
If your program is subroutine library, you may consider 
it more useful to permit linking proprietary applications 
with the library. If this is what you want to do,

use the GNU Library General Public License instead of 
this License.

Copyright 2004-2013 Verance Corporation. Cinavia™ 
is a Verance Corporation trademark. Protected by U.S. 
Patent 7,369,677 and worldwide patents issued and 
pending under license from Verance Corporation. All 
rights reserved.

Dolby TrueHD, Digital, Digital Plus, PL II

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, 
and the double-D symbol are trademarks of Dolby Laboratories. 

DTS-HD Master Audio™

For DTS patents, see http://patents.dts.com. Manufactured under license from 

DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, 

the DTS-HD logo and DTS-HD Master Audio are registered trademarks or 

trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. 

All Rights Reserved.

HDMI, the HDMI logo and High-Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC.

The 

Bluetooth®

 word mark and logos are registered trademarks 

owned by Bluetooth SIG, Inc. and any use of such marks by Arcam is 
under license. Other trademarks and trade names are those of their 
respective owners.

© 2013 CSR plc and its group companies.

The aptX® mark and the aptX logo are trade marks of CSR plc or 
one of its group companies and may be registered in one or more 
jurisdictions.

MP3

MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and 
Thomson multimedia

AAC/AAC Plus

aacPlus is a trademark of Coding Technologies. See 

codtech.vhost.noris.net

 for more information

FLAC

FLAC Decoder Copyright © 2000, 2001, 2002, 2003, 2004, 2005, 2006, 
2007, 2008 Josh Coalson

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions 
are met:

- Redistributions of source code must retain the above copyright 
notice, this list of conditions and the following disclaimer.

- Redistributions in binary form must reproduce the above copyright 
notice, this list of conditions and the following disclaimer in the 
documentation and/or other materials provided with the distribution.

- Neither the name of the Xiph.org Foundation nor the names of its 
contributors may be used to endorse or promote products derived 
from this software without specific prior written permission

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
CONTRIBUTORS ‘AS IS’ AND ANY EXPRESS OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE

Summary of Contents for SOLO MUSIC












































Reviews: