Aras CTINT1000, User Manual

Page: 35 / 42

One-Channel Video Transmitter
29
Event Action
You can set up event actions to notify the event detection when the transmitter detects events.
y
Alarm Out : Check the box to activate alarm out.
í
Type : Select the type of alarm-out device.
í
Dwell Time : Select the alarm-out dwell time. An alarm
out is activated for the preset dwell time after detecting
an event.
í
Schedule : Set up the period to enable alarm out. An
alarm out can be activated only during this period.
y
Email : Check the box to send an email.
í
SMTP Server , Port : Enter the IP address or domain
name and port number of the SMTP server. Select Use
SSL/TLS if the SMTP server requires SSL (Secure
Sockets Layer) authentication
.
í
Authentication ID , Password : Enter the ID and password if the SMTP server requires user authentication.
í
Sender , Recipient : Enter the sender’s and recipients’ email address. Up to 10 recipients can be added.
y
Remote Callback : Check the box to send a callback message to remote sites.
í
Retry : Select the number of times to try sending a message if it fails to send.
í
Setup : Enter the IP addresses and port numbers of the remote sites to send a message.
NOTES:
y
You will need to get the IP address or domain name of the SMTP server from your network administrator.
You can use the domain name instead of the IP address if you set up the DNS server when setting
up the network.
y
An email address must include the “@” character to be a valid address.