Aras CTINT1000, User Manual

Page: 13 / 42

One-Channel Video Transmitter
7
CAUTION: The network connector is not designed to be connected directly with cable or wire
intended for outdoor use.
WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD. MAKE
CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE. DO NOT
INSTALL POWER CORDS UNDER RUGS OR CARPET. THE POWER CORD HAS A GROUNDING
PIN. IF YOUR POWER OUTLET DOES NOT HAVE A GROUNDING PIN RECEPTACLE, DO NOT
MODIFY THE PLUG. DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES
INTO ONE CIRCUIT.
2.4 INIT Program Installation
The INIT (Integrated Network Installation Tool) program should be installed in your computer to
operate the transmitter. Computer system requirements for installing the INIT program are:
y
Operating System: Microsoft ® Windows ® XP or Microsoft ® Windows ® Vista
y
CPU: Intel Pentium IV (Celeron) 2.4GHz or faster
y
RAM: 512 MB or more
y
VGA: AGP, Video RAM 8MB or more (1024x768, 24bpp or higher)
CAUTION: If an older version of INIT software is installed on your computer, you should uninstall
the older version first.
1. Insert the installation CD.
2. Run the setup.exe file in the INIT folder, and install the software following the instructions.
3. Click
Accept
.
NOTE: Installing .NET Framework is required for INIT to operate
properly. This installation step will be skipped if.NET Framework
is installed on your computer.
4. Click Install .
NOTE: Visual C++ Runtime Libraries must be installed for INIT to
operate properly. This installation step will be skipped if Visual
C++ Runtime Libraries are installed on your computer.