FITOCLIMA 2500 HP
Mod. MI 271 EN / R00 23-10-2015
-33-
Section 4
Controller
4.1
Characteristics
The
ClimaPlus
500
Controller
2
has the ability to control the Air Temperature, Relative
Humidity, Radiation Intensity, CO2 Level and Irrigation in Climate Chambers and
associates a human interface unit to a control circuit board. The electronic board also
connects to an auxiliary electronic board, for supervision and protection. It also has an
interface to connect to a supervisor system.
It also has the capacity to store at 5 minutes intervals, all important data from chamber
operation for recording and later analysis. The memory capacity is ~40 000 samples making
a total of 5 months for an equipment permanently on. Reached the limits of memory, the
new samples replace older so it is always possible to recover the history of the chamber
during the last 5 months (or more if the chamber is turned off for some periods - 40,000 x 5
minutes ~= 3333 hours ~= 139 days).
If battery need to be replaced, use a 3 Vdc lithium button battery (24x3 mm), code
CR2430. This should be done by service personnel only.
2
The shown images in the section might present differences depending on the controller’s version.
Summary of Contents for FITOCLIMA 2500 HP
