FITOCLIMA 2500 HP
Mod. MI 271 EN / R00 23-10-2015
-30-
2.8
Connecting the equipment
After installation, place the power switch, located on the front of the electrical cabinet, to the
“I” position. The display lights up, indicating that the controller is ready to be programmed.
Warning:
Each time the equipment is turned on, after a long period of inoperable time, it
should stay in “
Chamber OFF
” for at least an 2 hours to heat up the compressor’s oil (see
section “Controller – Status Board”, for more information).
Monitoring of climatic conditions can be:
•
Manual with fixed values
.
•
Automatic (includes segments, repetition numbers, ramp calculations, etc.).
The types of operation are further described in the programming and operation of the
controller.
Warning:
The equipment is already pre-programmed from the factory on security
parameters. Read carefully the section on the programming and operation of the controller
before changing any parameter.
The installation conditions should be strictly complied with before connecting the
equipment for the first time.
Summary of Contents for FITOCLIMA 2500 HP
