10
Safety instructions are information that serve to prevent personal injuries. Safety instructions contain the
following information:
Type of danger
Possible consequences in case of non-compliance with the instructions
Measures to prevent personal injury
3.2
BASIC SAFETY REGULATIONS
Target group for these regulations
These regulations are aimed at all those who will be handling the seed drill.
Purpose of these regulations
These regulations aim to ensure that all persons who will be handling the seed drill are thoroughly informed
about the dangers and safety measures and observe the safety instructions in the operating manual and
on the seed drill. If you do not follow these regulations, you are at risk of injury and material damage.
Handling the operating manual
Observe the following regulations:
Read the Safety section and the section relating to your work completely. You must understand these
contents.
Always keep the operating manual close to the seed drill for reference purposes. There is a container
for this installed on the seed drill.
When passing on the seed drill, be sure to pass on the operating manual.
Handling the seed drill
Observe the following regulations:
Only persons who fulfil the requirements defined in this operating manual may handle the seed drill.
Do not use the implement if you are tired or under the influence of drugs, alcohol or medication.
Only use the seed drill for the intended purpose.
Never use the seed drill for other purposes that may seem similar.
Observe all of the safety measures that are indicated in this operating manual and on the seed drill.
Do not make any modifications to the seed drill, e.g. by removing parts or mounting unauthorised
parts.
When replacing defective parts, only use original spare parts or standard parts approved by the
manufacturer.
Operator obligations toward the personnel
As the operator, you have to ensure the following:
The personnel fulfils the requirements corresponding to his work.
The personnel has read and understood this operating manual before handling the seed drill.
The regulations applicable in your country for safety at work are being observed.
Procedure in case of accident
The seed drill is designed and built so that the personnel can work without risk. Despite all precautions,
however, unforeseeable accidents can still occur under unfavourable circumstances.
Always observe your company's guidelines regarding accidents.
More information on the subject of
Intended use of the seed drill on page 11
Personnel requirements on page 11
Dangers and safety measures on page 13
Summary of Contents for PS 120 M1
Page 39: ...39 9 2 2 PS WITH ISOBUS Electric fan Hydraulic fan...
Page 47: ...47 NOTES...