APV PS 120 M1, Operating Manual

Page: 36 / 48

36
Step Description
3 Set the brush adjustment lever to Position "+4".
4 Store the seed drill in a dry place to prevent the formation of germs inside the implement.
8.2 STORAGE OF THE SEED DRILL
For storage of the spreader, observe the following:

The implement must be stored in a dry place protected from weather conditions on level and solid
ground to ensure that it remains functional even if it is stored for a longer period of time.

Secure the implement against falling over or rolling away.

Nothing may be deposited or stored on the implement.

The implement must always be parked and stored in a secure area, to prevent unauthorised operation.
8.3 DISPOSAL
Disposal of the seed drill must be performed according to the local disposal regulations for machines.
9 APPENDIX
9.1 ACCESSORIES
9.1.1 FILLING LEVEL SENSOR
This sensor can be retrofitted on the PS 120/200/300 M1.
Operation with a control box 1.2, 5.2 or 6.2 is required.
It measures how much seed is still left in the hopper, and triggers an alarm
on the control box when there is not enough seed in the hopper. The
intensity of the sensor can also be adjusted for the respective seed type. It
is adjusted using the small slotted screw at the rear of the sensor.
Order number:
Item no. 04000-2-269
9.1.2 CABLE EXTENSION (6-PIN)
If the standard 6 m implement cable fitted is too short due of the length of
the soil tillage implement and/or the implement structure, or if the cable
cannot be routed practically, this 2 m or 5 m extension cable can be ordered
as an accessory.
Order number:
2 m: item no. 00410-2-148
5 m: item no. 00410-2-149
9.1.3 TOP LINK MOUNTING KIT FOR PS 120-500
With the top link mounting kit (three-point mounting bracket), you can attach
the PS 120/200/300 M1, PS 500 M2 to a CAT 1
– CAT 3 three-point hitch.
Order number:
Item no.: 04000-2-114