14
Transport
Danger
Where and in which situations
does the danger occur?
Countermeasure
Risk of crushing due to the
weight of the implement
When lifting and lowering the
implement
The implement may only be
transported by personnel trained
for this task.
Installation
Danger
Where and in which situations
does the danger occur?
Countermeasure
Risk of crushing due to the
weight of the implement
When lifting and lowering the
implement
The implement may only be
transported with a forklift or lift
truck by personnel trained for this
task.
Risk of slipping, stumbling and
falling
When mounting the implement
on a soil tillage implement or on
the tractor
Work must be performed on
sturdy steps with non-slip safety
shoes.
Set-up
Danger
Where and in which situations
does the danger occur?
Countermeasure
Risk of injury due to moving parts When setting the spread rate,
which must be done with the
seeding shaft cover removed
The spread rate may only be
adjusted exactly according to the
operating manual by trained
personnel.
Risk of injury due to moving parts
when the implement is
accidentally switched on
When the agitator is activated,
which must be done with the
seeding shaft cover removed
Make sure that the implement is
disconnected from the power
supply to prevent sudden start-up
of the implement.
Danger due to defective
implement parts
When operating the implement
Before operating the implement,
always check for fractures,
cracks, chafe marks, leaks, loose
bolts, vibrations, sounds and
function.
Service the implement regularly.
Risk of injury due to oil leaks
When starting up the hydraulic
fan
Nobody may be standing in the
danger zone during start-up.
Wear protective equipment.
Operation
Danger
Where and in which situations
does the danger occur?
Countermeasure
Risk of injury due to rotating
parts
When handling the implement
during operation
Make sure that the covers for the
agitator are closed during
operation.
Risk of injury due to seed being
thrown out
While spreading seed.
Always ensure that there is
nobody standing in the spreading
range of the implement.
Risk of slipping, stumbling and
falling
When handling the implement
during operation
Only enter the implement area
using dry, sturdy steps with non-
slip safety shoes.
The implement may not be used
in the rain or in a thunderstorm.
Summary of Contents for PS 120 M1
Page 39: ...39 9 2 2 PS WITH ISOBUS Electric fan Hydraulic fan...
Page 47: ...47 NOTES...
