22
Step
Description
Explanation
4
Connect the power supply cable (5) between the
motor module (4) and the tractor cable set (1).
5
Connect the implement cable (6) to Control Box
(7).
6.1
5.2 Control Box: Select
Electric PLUS
in the
1. Fan
motor
menu.
6.2
ISOBUS: Select
Electric fan PLUS
in the
PS fan
menu
.
5
OPERATION
In this section, you will learn how to properly configure the seed drill and the seed flow rate, and how to
adjust it during operation.
5.1
SETTING THE HYDRAULIC FAN (HF)
Purpose
The hydraulic fan produces an air current that carries the seed through the hoses to the dispersion plates.
The required air pressure and air quantity depend strongly on the seed (type and weight), the spread rate,
working width and speed. For this reason, it is not possible to give precise specifications for the correct
fan settings, it must be determined in field trials! Reference values for the fan setting can be found in the
setting table for the flow control valve.
Requirements
The following requirement must be fulfilled for this work step:
The hydraulic fan is connected, see also
Connecting the hydraulic fan (HF)
on page 20.
Required components, tools and materials
For this work step, the following components, tools and materials are required:
None
Summary of Contents for PS 120 M1
Page 39: ...39 9 2 2 PS WITH ISOBUS Electric fan Hydraulic fan...
Page 47: ...47 NOTES...