HI Power Supply User Manual
Technical Sales / Customer Service:
+1-818-338-
7788 • Email:
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA •
21 / 31
4.1 Internal Device Address inside Hi-power
A HI-power system is composed of different independent devices (modules). The internal device address
is used to identify the specific device or module group that the user wants to communicate with. For the
internal device addresses inside the HI-power system, please refer to the table below.
4.2 Internal Device Address Description
● 0x101
Each address contains 8 Byte Length, which represents the output current report of each module, Figure
4.1
Figure 4.1
M1~M8 represent Module1~module8, and they all have corresponding addresses. For example, if the
output current of M1 is grounded, the address of M1 shows 0X00
HI-power Internal
Device Address
Description
0x101
Output current of module 1~module 8
0x103
Output Voltage of module 1~module 8
0x105
Parameter setting of module 1~module 8
0x111
Internal signal status of module 1~module 8
0x201
Module 1~module 8 mode selection and module startup/shutdown
