HI Power Supply User Manual
Technical Sales / Customer Service:
+1-818-338-
7788 • Email:
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA •
14 / 31
Table 13 lists the corresponding output current when the signal is output.
3. Operation
3.1 Hi-Power System Power-up
This section describes the initial startup of HI-power equipment. In this section it is assumed that this
will be the first. After HI-power racks and modules are manufactured by ATN Technology, HI-power
racks and Hi-power modules will be powered on. Note: Please follow the allowable input AC parameters
located on the AC input rating label of the HI-power rack.
3.1.1 Initial Power-up
This section discusses the default settings of HI-power rack and HI-power module when ATN Technology
ships
●According to user configuration to HI
-power rack and HI-power module input and output
connections Require.
●Apply input AC power to the HI
-power rack.
After the application inputs AC, the internal program will go through the startup sequence. The fan will
instantly Open at full speed. The power LED on the front panel (as shown in Figure 3-1) will light up After
the startup sequence, each module is equipped with an LED, and the power LED will be steady green.
0~10V
Corresponding Output Current
1V
10% Nominal Output Current
2V
20% Nominal Output Current
3V
30% Nominal Output Current
4V
40% Nominal Output Current
5V
50% Nominal Output Current
7.5V
75% Nominal Output Current
8.6V
86% Nominal Output Current
10V
100% Nominal Output Current
