HI Power Supply User Manual
Technical Sales / Customer Service:
+1-818-338-
7788 • Email:
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA •
30 / 31
After the definition is complete, click "Start" to open the hardware device. If the device is connected to
the software normally, the device indicators PWR and SYS will have a steady light, A slow flash (about 1
time per second). If it prompts "Failed to open the device", please check whether the device driver has
been installed in the device manager.
Or whether "controlcan.dll" has been overridden and replaced, Or whether the port has been occupied
by opening the hardware device with other software.
Click to start the device and a dialog box to set the baud rate will pop up. The set baud rate must match
the If the bus is consistent, data can be sent and received normally. If you are a dual-channel device, you
can CAN2 set the baud rate respectively, you only need to set the baud rate in the interface, other
options do not need to be set, just keep the default.
