APS HI-POWER 240, User Manual

Page: 24 / 31

HI Power Supply User Manual
Technical Sales / Customer Service: +1-818-338-
7788 • Email:
sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA •
www.autec.com
24 / 31
● 0X 201
The 0x211 address is provided to the client. Each module has four input signals, which are Enable,
Disable, Mode, Mode1 signals, and 8 groups of modules have 32PIN GPIO signals. Figure 4.5
Figure 4.5
Mode Selection
Notes:
1. The mode selection of module 1 and module 2 needs to be the same
2. The mode selection of module 3 and module 4 needs to be the same
3. The mode selection of module 5 to module 8 needs to be the same
Item Module-1 Module-2 Module-3 Module-4 Module-5 Module-6 Module-7 Module-8
Mode Bit3 Bit7 Bit11 Bit15 Bit19 Bit23 Bit27 Bit31
Mode1 Bit4 Bit8 Bit12 Bit16 Bit20 Bit24 Bit28 Bit32
Module1, Module2
ITEM Bit3(GPIO3), Bit7(GPIO7) Bit4(GPIO4), Bit8(GPIO8)
CC Mode L L
CV Mode L H
Module5, Module6, Module7, Module8
ITEM
Bit19(GPIO19) Bit23(GPIO23)
Bit27(GPIO27) Bit31(GPIO31) Bit20(GPIO20) Bit24(GPIO24)
Bit28(GPIO28) Bit32(GPIO32)
CC Mode L L
CV Mode L H