SECTION 7: CONNECTORS, APPLICATIONS & PROTECTION FEATURES
Entire Contents Copyright
2014 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
42L Series Modular DC Load Operation Manual
Page 36 of 88
6
Front Panel Operation
This Chapter provides an overview of front panel operation for the 42L Series DC Loads. For
remote control operation, refer to Section 8 “Remote Control Programming” of this manual
for an overview of available programming commands.
6.1
Front Panel Layout
The front panel layout is shown in Figure 6-1 below. Rack handles and ears are shown but
can be removed if the unit will only be used on the bench.
Figure 6-1: 44M04 Chassis with 41L0630 Series Loads Front Panel View
Each load module has its own dedicated LCD readouts located along the top. User controls
are located below these displays. Along the bottom edge of the 44M04 chassis, memory
bank controls are positioned next to a separate memory bank and system setting display.
The power ON/OFF switch is found in the lower left corner.
