SECTION 7: CONNECTORS, APPLICATIONS & PROTECTION FEATURES
Entire Contents Copyright
2014 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
42L Series Modular DC Load Operation Manual
Page 61 of 88
6.4.3
Go/NoGo Testing in CC Dynamic Mode
In dynamic constant current mode, the voltage limits are used to determine the pass or fail
area for the input voltage.
Figure 6-5: LIMIT Test in Dynamic CC Mode
6.4.4
Go/NoGo Testing in CR Mode
In constant resistance mode, the voltage limits are used to determine the pass or fail area
for the input voltage.
Figure 6-6: LIMIT Test in CR Mode
