SECTION 3: PRODUCT OVERVIEW
Entire Contents Copyright
2014 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
42L Series Modular DC Load Operation Manual
Page 21 of 88
3.7.1
Accessory Installation
Several connectors are included in the 42L ship kit to allow connection of load and sense
wires to equipment unit under test (EUT). The following illustrations show how these
connectors can be used to connect a load. Note that for lower impedance connections as
may be desirable in high current applications, use of the banana jacks and Y-hooks (spade
lugs) can be combined.
Figure 3-4: Load and sense connections using Y-hooks/spade lugs
Figure 3-5: Load and sense connections using banana plugs - insertion
