APS 42L Series, Operation Manual

Page: 63 / 88

SECTION 7: CONNECTORS, APPLICATIONS & PROTECTION FEATURES
Entire Contents Copyright

2014 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
42L Series Modular DC Load Operation Manual Page 63 of 88
6.5 Initial Power-on Settings
When powering up the 42L Series electronic loads, the initial load settings after power ON
are as shown in the tables below respectively by model number. These are the factory
default settings.
6.5.1 Model 42L0860 Initial Settings
Item Initial value Item Initial value
CC L+Preset 0.000 A
LIMIT
V_Hi 81.000 V
CC H+Preset 0.000 A V_Lo 0.000 V
CR H+Preset 801 00 Ω I_Hi 60.00 A
CR L+Preset 801 00 Ω I_Lo 0.0000 A
CV H+Preset 81.000 V W_Hi 250.20 W
CV L+Preset 81.000 V W_Lo 0.000 W
CP L+Preset 0.000 W CONFIG SENSE Auto
CP H+Preset 0.000 W LD-ON 1.0 V
DYN
T HI 0.050 ms LD-OFF 0.500 V
T L0 0.050 ms POLAR +LOAD
RISE 250.0 mA/ µ s SHORT Disabled
FALL
250.0 mA/
µ
s
OPP Disabled
OCP Disabled
Table 6-2: Model 42L0860 – CH A - Power-on Settings
Item Initial value Item Initial value
CC L+Preset 0.000 A
LIMIT
V_Hi 81.000 V
CC H+Preset 0.000 A V_Lo 0.000 V
CR H+Preset 80100 Ω I_Hi 6.000 A
CR L+Preset 80100 Ω I_Lo 0.0000 A
CV H+Preset 81.000 V W_Hi 50.40 W
CV L+Preset 81.000 V W_Lo 0.000 W
CP L+Preset 0.000 W CONFIG SENSE Auto
CP H+Preset 0.000 W LD-ON 1.0 V
DYN
T HI 0.050 ms LD-OFF 0.500 V
T L0 0.050 ms POLAR +LOAD
RISE
25.0 mA/
µ
s
SHORT Disabled
FALL 25.0 mA/ µ s OPP Disabled
OCP Disabled
Table 6-3: Model 42L0860 – CH B - Power-on Settings