SECTION 7: CONNECTORS, APPLICATIONS & PROTECTION FEATURES
Entire Contents Copyright
2014 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
42L Series Modular DC Load Operation Manual
Page 62 of 88
6.4.5
Go/NoGo Testing in CV Mode
In constant voltage mode, the current limits are used to determine the pass or fail area for
the load current.
Figure 6-7: LIMIT Test in CV Mode
6.4.6
Go/NoGo Testing in CP Mode
In constant power mode, the current limits are used to determine the pass or fail area for
the input voltage.
Figure 6-8: LIMIT Test in CP Mode
