SECTION 7: CONNECTORS, APPLICATIONS & PROTECTION FEATURES
Entire Contents Copyright
2014 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
42L Series Modular DC Load Operation Manual
Page 46 of 88
KEY# Description
The time during which the waveform is high includes the rise time and is set in “ms” The time during
which the waveform is low includes the fall time and is set in “ms”. The RISE and FALL times are set
in “mA/μs” or “A/μs”.
The actual engineering unit is shown in the bottom right corner of the LCD
display.
To program the Dynamic mode, proceed as follows:
Press DYN setting key. The DYN LED will turn ON. To set the T_Hi high level period, the middle 5 digit
LCD display will show [
T-Hi
]
.
The lower 5 digit LCD display will show the set value in “ms”. The T_Hi
set range is from 0.050 ms to 9999 ms. Adjust in 0.001ms steps by rotating the dial.
