manualshive.com logo in svg

APS Resource HTC Kit, Installation And Owner'S Manual

The APS Resource HTC Kit is a high-quality product that enhances energy efficiency in commercial buildings. To ensure seamless installation and optimal usage, make sure to download the Installation And Owner's Manual from our website. This user-friendly manual is available for free download, allowing you to swiftly get started with your HTC Kit.

Share
Download
background image

PAGE 2

©2010 4Front Engineered Solutions, Inc. - APS Resource 

    

             

AP4047 RA 11/10

            

CONTENTs

LIMITED WARRANTY .............................................................................................    1
CONTENTS & SAFETY SIGNAL WORDS ..............................................................    2
SAFETY PRACTICES..................................................... .............................................    3
TOOL LIST ...............................................................................................................    3
INSTALLATION ........................................................................................................    4
 

PIT CHECK ........................................................................................................    4

 

LEVELER CHECK ..............................................................................................    4

 

SITE PREPARATION .........................................................................................    5

 

SECONDARY MAINTENANCE STRUT .............................................................    6

 

LEVELER PREPARATION .................................................................................    7

 

RAMP PLATFORM BRACKET INSTALLATION .................................................    8

 

PIT FLOOR BRACKET .......................................................................................    9

 

LIP CYLINDER INSTALLATION .........................................................................    10

 

LIP SUPPORT INSTALLATION ..........................................................................     11

 

PLACARD INSTALLATION ................................................................................     11

 

POWER SYSTEM INSTALLATION .....................................................................    12

 

WIRING DIAGRAMS ..........................................................................................    13

 

ARTD SYSTEM INSTALLATION ........................................................................    14

 

CONVERSION SYSTEM TEST ..........................................................................    17

OPERATION ............................................................................................................    17
MAINTENANCE .......................................................................................................    20
TROUBLESHOOTING GUIDE .................................................................................    21
PARTS LIST .............................................................................................................    22 

sAFETY sIGNAL WORDs

You may find safety signal words such as DANGER, WARNING, CAUTION or NOTICE throughout the owners 

manual. Their use is explained below.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. 

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates an imminently hazardous situation which, 

if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, 

if not avoided, may result in minor or moderate 

injury.

Indicates a potentially hazardous situation which, if 

not avoided, could result in death or serious injury.

Notice is used to address practices not related to 

personal injury.

Summary of Contents for HTC Kit





























Reviews:

No comments

Related manuals for HTC Kit

ubbink Ubiflux F300 Installation Instructions Manual preview
Ubiflux F300
Brand: ubbink Pages: 7
M-system R7E-YV2 Instruction Manual preview
R7E-YV2
Brand: M-system Pages: 6
HomeMatic HmIP-MIOB Installation Instructions And Operating Manual preview
HmIP-MIOB
Brand: HomeMatic Pages: 68
OMCN 126/A Instructions For Use, Maintenance And Spare Parts preview
126/A
Brand: OMCN Pages: 40
4CR 6.5600.1000 Operation Manual preview
6.5600.1000
Brand: 4CR Pages: 7
Mithraeum Brewiks 500 User Manual preview
Brewiks 500
Brand: Mithraeum Pages: 33
DINA Safeline DNSL-IO2 Original Instruction Manual preview
Safeline DNSL-IO2
Brand: DINA Pages: 28
red lion ITMA Manual preview
ITMA
Brand: red lion Pages: 8
iCONNECT PRL-60-240 Installation Instructions Manual preview
PRL-60-240
Brand: iCONNECT Pages: 20
Air Liquide M 130 Owner'S Manual preview
M 130
Brand: Air Liquide Pages: 23
Carson Reflex Wheel-X 50 050 0030 Instruction Manual preview
Reflex Wheel-X 50 050 0030
Brand: Carson Pages: 52
R. Beck Maschinenbau HS 2000 LARGE FH Operating Manual preview
HS 2000 LARGE FH
Brand: R. Beck Maschinenbau Pages: 34
Miller Electric Blue Star 3500 Owner'S Manual preview
Blue Star 3500
Brand: Miller Electric Pages: 60
Measurement Computing USB-1408FS-Plus User Manual preview
USB-1408FS-Plus
Brand: Measurement Computing Pages: 29
HTP Invertig 313 Manual preview
Invertig 313
Brand: HTP Pages: 36
Jacuzzi JAUTPS Installation & Operation Manual preview
JAUTPS
Brand: Jacuzzi Pages: 28
WAGO 753-452 Manual preview
753-452
Brand: WAGO Pages: 50
warequip P2GOUltiMate Instruction Manual preview
P2GOUltiMate
Brand: warequip Pages: 15

Brands by name

Popular brands

Load more brands