INSTALLATION AND HARDWARE MANUAL
ADI 1075 Pilot System
BASIC UNIT
December 2002
2-4
A
B
C
D
E
F
2.4 REAR VIEW:
Rear view of the ADI 1075 Pilot System
A = Pawl Latches
B = Rear Panel
C = Compressed air in/outlet
D = Gas inlets (CO2/O2/Air/N2)
E = Mains cable gland
F = Wet part connections bulkhead
The rear panel of the ADI 1075 Pilot System can be removed in order to replace fuses (refer
to chapter 2.5: Installation); turn both pawl latches counter clockwise to unlock..
The rear panel is connected internally to the cabinet by an earth wire.
Disconnect this wire before removing the panel.
Summary of Contents for ADI 1075
Page 1: ......