Applikon ADI 1075, Installation/Hardware Manual, Page: 10 / 31

INSTALLATION AND HARDWARE MANUAL
ADI 1075 Pilot System
BASIC UNIT
December 2002
2-5
2.5 INSTALLATION:
PHYSICAL DIMENSIONS:
For physical dimensions (H x W x D) refer to the drawings in chapter 9.
WATER & STEAM SUPPLY:
Supply of water and steam must be connected at the rear of the frame; see pictures below:
Top view of Wet Part for Top view of Wet Part for
20 - 70 L bioreactors 100 - 300 L bioreactors
A = Steam supply A = Steam supply
B = Drain B = Drain
C = Water supply C = Water supply
D = Water return D = Water return
Piping diameter = 12.7mm OD Piping diameter = 21.3mm OD
Note:
- The type of Wet Part connection (hose barb, tri clamp or other) is selected on customer
specification!
- The water return is used for water circulation (or return to drain) during cooling.
- The drain is used to remove water (or condensed steam) during sterilization.