INSTALLATION AND HARDWARE MANUAL
ADI 1075 Pilot System
BASIC UNIT
December 2002
2-3
2.3 RIGHT HAND SIDE VIEW:
Right hand side view of the ADI 1075 Pilot System
A = ADI 1075 Pilot System Cabinet
B = Frame
C = Wet part
D = Connections for Jacket
E = Position for Bioreactor
The ADI 1075 Pilot System Cabinet is mounted on a frame with wheels. The dimension of
the frame depends on the size of the bioreactor (graphical image shows the frame for a 20 -
70 l reactor)
The wet part is used for temperature control purposes (refer to chapter 4) and consists of a
heating element, a circulation pump, pneumatic valves and piping. The dimension of the wet
part depends on the size of the bioreactor (graphical image shows the wet part for a 20 - 70
l reactor). The mounting holes and cable connections at the right hand side are used for
mounting a ADI 1030 or 1060 controller.
Summary of Contents for ADI 1075
Page 1: ......